Tiller hinge

I made a bit more progress this evening. My neighbour returned the dodgy tiller fitting over the week end. He welded in the counter sunk holes and re-drilled them to take M6 bolts.
Unfortunately they fouled the bracket and I had to cut a rebate for the bolt heads. It's all good now, the surface bolt heads will be easier to disassemble than before, especially as I'll fit them with plenty of copper grease.

I've also made progress with some of the wood work but nothing is in a finished state yet so will post about them another time :-)


As was with recessed allen bolts



Now, Hex head machine screws